Hansiman H215 wear resistant putty
Package: 500g.set
A two-component putty, enhanced with titanium, wear resistance is 2~3 times as good as that of normal metals. Cured material is tough and wear resistant and has high strength. For repairing abraded shaft, shaft holes, spindles and keyways.

Hansiman H216 wear resistance putty    
Package: 500g/set
Two-component putty, based on hyper hard sphere ceramics and metal carbides, high adhesion to metal substrates. For repair of equipment eroded by grinding materials with diameters less than 3mm and equipment eroded by flush, including mortar pump, water pump, blades and case of a fan, and screw propellers.

Hansiman H218 wear resistant putty    
Package: 500g/set
Two-component putty, based on hyper hard sphere ceramics and metal carbides. For repair of equipment eroded by grinding materials with diameters less than 25mm, including mud pump, conveyor groove and pipe elbow.

Hansiman H226 wear resistant putty    
Package: 10kg/set
Two-component putty, based on hyper hard sphere ceramics and crystals, high adhesion to metal substrates. Coating cures fast and hence can reduce break-down time of equipment. For repairing large areas eroded by normal grinding particles and for making preventive coatings on the areas of equipment such as large mortar pumps, blades and cases

Hansiman H228 wear resistant putty    
Package: 10kg/set
Two-component putty, based on hyper hard sphere ceramics and crystals. Coating can be as thick as 30mm; cures fast and hence can reduce break-down time of equipment. For repairing large areas eroded by heavy duty grinding particles and for making preventive coatings on the areas of equipment such as pumps, pipes and elbows that pipe liquid containing many sands